Products


Cupolex



Cupolex


CUPOLEX  are stay-in-place forms to create aerated concrete floors with unreinforced or reinforced concrete slabs on grade and other concrete structures. Concrete is poured over the modular dome forms to create floating or structural slabs on grade. The unique concrete geometry Cupolex creates, forms an under-slab void that can be vented to remove moisture and soil gases or provide solutions for various sustainable construction applications – uses less concrete and reinforcing than a standard slab with equivalent load bearing capacity. The load is transferred to the ground thanks to the arch-column geometry while the void underneath can be used for many different applications. Aerated raised concrete floors such as CUPOLEX can be used as void filling to decrease the structure weight and to rise the slab height.


Cupolex

Cupolex


Cupolex

Cupolex Rialto



Cupolex Rialto


CUPOLEX-RIALTO is a forming system for providing an easy, efficient and fast solution for constructing concrete raised slabs or aerated floors with heights from 500mm (20 inches) to 2500mm (100 inches). This cutting edge forming system comprises of CUPOLEX domes, tubes and bases that quickly interlock and connect to each other composing a self-bearing structure ready for the placement of a concrete slab. The elevated CUPOLEX slab supported by the matrix of columns formed by the tubes allows the system for high load-bearing capacities and the elevated CUPOLEX RIALTO structure and the void created below the slab can be used for various purposes and applications. All components that make up the CUPOLEX®-RIALTO® forming system are made from 100% recycled plastic.



Cupolex Soil Cell


Cupolex soil cell is a forming system for providing an easy, efficient and fast solution for constructing a pavement with a customizable volume of uncompacted planting soil underneath, in order to plant trees and guarantee their healthy growth.

This cutting-edge forming system comprises of CUPOLEX domes, tubes, bases and a patented bracing system that quickly interlock and connect to each other composing a self-bearing structure ready for the placement planting soil and furthermore the concrete pavement.


Cupolex

Cupolex Soil Cell


Cupolex

Isolcupolex Plus



Isolcupolex Plus


ISOLCUPOLEX PLUS is a patented system to create insulated and aerated concrete floors. The elements of the system, made of insulation material work as a formwork for the concrete to create a raised floor insulation. It is ideal when insulation is required and when there is a high potential for humidity or gas to come from the ground, as well as when the pavement layer has to be raised or backfilled.
The system is made of a 100% recycled plastic dome, that protects from the raising of humidity, and an insulation layer in EPS with a specific geometry and high level of insulation. ISOLCUPOLEX PLUS’s primary advantage is to have the insulation and aeration in one step and also to have the insulation layer on the outside of the cast-in-place concrete structure. In this way the concrete can work as a thermal flywheel providing an optimal average radiant temperature all year round.



IsolCupolex


ISOLCUPOLEX  is a multi patented system for the creation of an aerated concrete slab with an integrated floor insulation with heights varying from 11 cm to 250 cm.

ISOLCUPOLEX system acts as a stay-in-place forming system for the casting of the pavement slab. The slab can bear high loads and leave a void underneath providing aeration and /or passage of utilities. In this way the slab has an integrated floor insulation layer on the outer side of the structure: this stratigraphy helps to avoid all humidity problems. Moreover the concrete layer can better provide a thermal flywheel for an optimal average radiant temperature all year round.


Cupolex

IsolCupolex


Cupolex

Windi



Windi


CUPOLEX® WINDI® creates a ventilated floor in new or remodeled buildings without affecting the structure of the building. The adoption of CUPOLEX® WINDI® allows you to save on waterproof sheathing and guarantees a constant seal against dampness. CUPOLEX®-WINDI® may also be easily attached to walls to create a void capable of ventilating and eliminating mold or installed to create ventilated flat or pitched roofs.



Windi Drain


WINDIDRAIN® system to create roof gardens, provides superior water drainage, water storage, and aeration to create a harmonious balance of air and water in the substrate soil.

The WINDIDRAIN® elements are specifically designed for extensive and intensive roof gardens where substantial water retention is required for plant usage. They are light weight panels made of 100% recycled polypropylene, molded specially and designed with retention cups and drainage.


Cupolex

Windi Drain



EPS


EPS

Climablock



ClimaBlock


Climablock is a high quality ICF system (Insulated Concrete Form), to realize concrete walls integrating in only one solutions the structural resistance of concrete with the thermal insulation properties of EPS (Expanded polystyrene).

Climablock walls are characterized by the presence of EPS panels on the inner and outer surface, providing a great thermal insulation during winter and summer seasons preventing any heat dispersion, saving money and increasing comfort. The insulation layer is uniform and continuous preventing the formation of thermal bridges. The specific stratigraphy of the wall: insulation – mass – insulation, gives optimum level of insulation even during summer, thanks to the elevate thermal lag, damping of the thermal wave and trasmittance of the wall. With Climablock ICF system you can build anti seismic buildings, thermally and acoustically insulated, with a high comfort level and healthiness, without humidity and mold formation.



Kaldo


KALDO is a thermo-panel, made of EPS (expanded polystyrene) elements, to create suspended slabs or ceilings with monodirectional beams and with a modulable thermal insulation. When compared to traditional technologies, KALDO offers a more lightweight materiel with higher thermal insulation properties.


EPS

Kaldo


EPS

Spyrogrip



Spyrogrip


The insulation panel Spyrogrip is the most advance solution for the thermal insulation of a traditional building. Used whenever you need to apply insulation panels on a wall or ceiling.

The panels, in fact, are made of EPS Twinpor® that lowers the thermal trasmittance, hence improving insulation with respect to traditional EPS panels with the same thickness.

All panels are manufactured via injection molding, improving traspirability, planarity and present interlooking teeth to guarantee an easy and perfect installation. The inside face of all panels presents omega Ω shaped grooves to increase surface and improve connection with chemical glue or mortar in addition to mechanical joints.



Ventus


VENTUS are aerated and thermally insulated roof panels in Twinpor Polystirene (EPS) for the creation of thermally insulated roofing packages with draining grooves for condensation droplets and a ventilation chamber to be applied to new structures and renovations.

VENTUS panels provide an external thermal insulation on the roof that improves the thermal efficiency of the building, and can be configured to increase the thermal inertia of the roof or to install the roof finishing or photovoltaic panels directly on VENTUS.



EPS

Ventus



Altri Prodotti


Altri Prodotti

Pratex



Pratex


The Pratex lawn protection grid is a modular element for the construction of driveways and pedestrian areas, protecting the grass surface: thanks to its larger cells compared to the average product, it keeps the lawn compact and thick even under car passage or parking.



Scudox


SCUDOX is a dimpled waterproof membrane made of HDPE (high density polyethylene) suited for waterproofing buried walls or foundations in contact with the ground.

The dimpled membrane is laid down on the surface of the walls and allows a total separation between the walls, both in concrete and in masonry, and the moisture of the ground. SCUDOX also work as protection from the plant roots present in the ground.


Altri Prodotti

Scudox


Altri Prodotti

Tubix



Tubix


TUBIX is a disposable column formwork in cardboard for the construction of cylindrical pillars. It the simplest and most economical solution for cast-in-place monolithic columns offering load-bearing and decorative functions.

The single-use formwork can be custom ordered with diameters ranging from 15 to 120 cm and heights up to 12 m.

TUBIX can form pillars with smooth or spiral finishing due to the inner polyethylene layer. The smooth finishing allows the column’s concrete to be left exposed.


ITALY HEADQUARTERS

San Vito al Tagliamento

PONTAROLO ENGINEERING SPA have been working in the construction business for over 55 years.
+39 0434 857010

www.pontarolo.com

info@pontarolo.com

FOLLOW US

Follow our news and activities on social media



Privacy Policy

Cookie Policy